Sale

Heavy Duty Onboard Air System

Part Number: 10005
Regular price $351.16
Regular price $438.95 Sale price $351.16
Heavy Duty Onboard Air System Heavy Duty Onboard Air System Heavy Duty Onboard Air System Heavy Duty Onboard Air System Heavy Duty Onboard Air System Heavy Duty Onboard Air System Heavy Duty Onboard Air System
Heavy Duty Onboard Air System
Heavy Duty Onboard Air System
Heavy Duty Onboard Air System
Heavy Duty Onboard Air System
Heavy Duty Onboard Air System
Heavy Duty Onboard Air System
Heavy Duty Onboard Air System
Sale

Heavy Duty Onboard Air System

Part Number: 10005
Regular price $351.16
Regular price $438.95 Sale price $351.16

VIAIR’s Heavy Duty Onboard Air System is a pre-packaged compressed air solution that provides a faster 33% duty cycle 400C compressor, 2.5 gallon air tank, and all components needed to install a working system capable of inflating tires right out of the box.

Heavy Duty Onboard Air System

Designed by

VIAIR Corp

Faster Fills

For large off-road tires

IP-Rated

Dust and waterproof

What’s in the Box

Compressor

Tank and Airline hoses

Electrical

Fittings

Mounting Kit

PSI Gauge

Specifications

Performance

Fill Rates

Resources

SPECS:

  • CFM: 2.62 @ 0 PSI
  • 12-Volt
  • Permanent Magnetic Motor
  • Duty Cycle: 33% @ 100 PSI
  • Max. Working Pressure: 150 PSI
  • Max. Amp Draw: 30-Amps
  • Ingress Protection Rating: IP67
  • Max Ambient Temp: +158°F
  • Min Ambient Temp: -40°F

FEATURES:

  • 2.5 Gallon VIAIR Air Tank
  • 400C VIAIR Compressor w/Thermal Overload Protector
  • 35ft. Coil Hose with Tire Chuck
  • 1/4” Quick Connect Stud (F)
  • 1/4” Quick Connect Coupler (F)
  • Dash Panel Gauge with ON/OFF Switch
  • Pressure Switch with Relay (110 PSI on, 145 PSI off)
  • Reducer: 1/8” (F) to 1/4” (M)
  • 1/4” 175 PSI Safety Valve
  • 1/4” Drain Cock
  • (3) 1/4” Compression Fittings
  • 20ft. 12-Gauge Wire with Inline Fuse Holder
  • 4” Strip of Continuous Grommet Material
  • Accessory Airline
  • Electrical Connections

PLEASE NOTE:
Pressure Switch w/Relay (PNs 90110, 90111, 90113, 90118) is not a sealed unit and should be installed in an area protected from the elements to prevent damage and/or failure. Use thread sealant for proper installation. Thread tape is not recommended. Properly sealed, recommended torque for 1/8” is 10 ~ 11 ft. lbs. Recommended torque for 1/4” and 3/8” is 16 ~ 18 ft. lbs.

12-VOLT COMPRESSOR - Supply Voltage 13.8 Volts

TIRE FILL RATE

TANK FILL RATE

Product Resources

Find all the information available for this product

VIAIR in the wild
VIAIR in the wild
VIAIR in the wild
VIAIR in the wild

Product Reviews

All third party product names, logos, and brands are property of their respective owners. All company, product service and trademark names are for identification purposes only. Use of these names, logos, and brands does not imply ownership or endorsement.

Warning:

This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov