Sale

Continuous Duty Onboard Air System

Part Number: 20002
$503.16
$628.95 $503.16
Continuous Duty Onboard Air System Continuous Duty Onboard Air System Continuous Duty Onboard Air System Continuous Duty Onboard Air System Continuous Duty Onboard Air System Continuous Duty Onboard Air System Continuous Duty Onboard Air System
Continuous Duty Onboard Air System
Continuous Duty Onboard Air System
Continuous Duty Onboard Air System
Continuous Duty Onboard Air System
Continuous Duty Onboard Air System
Continuous Duty Onboard Air System
Continuous Duty Onboard Air System
Sale

Continuous Duty Onboard Air System

Part Number: 20002
$503.16
$628.95 $503.16

VIAIR’s Continuous Duty Onboard Air System is a pre-packaged compressed air solution that provides an industry-leading, 200 PSI rated, 100% duty cycle 485C CE compressor, 2.5 gallon air tank, and all components needed to install a working system capable of inflating tires of virtually any size.

Continuous Duty Onboard Air System

Designed By

VIAIR Corp

Faster Fills

For large off-road tires

IP-Rated

Dust and waterproof

What’s in the Box

Compressor

Tank and Airline hoses

Electrical

Fittings

Mounting Kit

Inflation Gun and Gauge

Specifications

Performance

Fill Rates

Resources

SPECS: 

  • CFM: 2.24 @ 0 PSI
  • 12-Volt
  • Permanent Magnetic Motor
  • Duty Cycle: 100% @ 200 PSI
  • Max. Working Pressure: 200 PSI
  • Max. Air Tank Size: 5.0 Gallon
  • Max. Amp Draw: 23-Amps
  • Ingress Protection Rating: IP67
  • Max Ambient Temp: +158°F
  • Min Ambient Temp: -40°F
  • Dimensions: 10.63″L x 4.1″W x 6.44″H
  • Net Weight: 11.10 lbs.

FEATURES:

  • 2.5 Gallon VIAIR Air Tank (200 PSI)
  • 485C Stealth Black VIAIR Compressor w/ Thermal Overload Protector
  • Digital Tire Inflation Gun with 180 PSI Gauge
  • 30ft. Inside Braided Black Coil Hose with Quick Connects
  • 1/4” NPT Quick Connect Stud (F)
  • 1/4” NPT Quick Connect Coupler (F)
  • Dash Panel Gauge with ON/OFF Switch
  • Sealed Pressure Switch
    (165 PSI on, 200 PSI off)
  • Reducer 1/8” NPT (F) to 1/4” NPT (M)
  • Reducer 3/8” NPT (F) to 1/4” NPT (M)
  • 1/4” NPT 250 PSI Safety Valve
  • 1/4” NPT Drain Cock
  • (3) 1/4” NPT Compression Fittings
  • 4” Strip of Grommet Material
  • 20ft. 12-Gauge Wire with Inline Fuse Holder
  • Electrical Connections
  • Accessory Airline

PLEASE NOTE:
Use thread sealant for proper installation. Thread tape is not recommended. Properly sealed, recommended torque for 1/8” is 10 ~ 11 ft. lbs. Recommended torque for 1/4” and 3/8” is 16 ~ 18 ft. lbs.

12-VOLT COMPRESSOR - Supply Voltage 13.8 Volts

TIRE FILL RATE

TANK FILL RATE

Product Resources

Find all the information available for this product

User Manual Wiring Diagram Plumbing Diagram Dimensional Drawing
VIAIR in the wild
•
VIAIR in the wild
•
VIAIR in the wild
•
VIAIR in the wild
•
bento1

Product Reviews

All third party product names, logos, and brands are property of their respective owners. All company, product service and trademark names are for identification purposes only. Use of these names, logos, and brands does not imply ownership or endorsement.

Warning:

This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov