VIAIR Corporation

Ultra-Light Duty OBA

For Air Horns & Air Lockers

105 PSI / 1.53 CFM P/N 10000

Ultra Light Duty Onboard Air System can be used to pressurize
the included 1.0 gallon air tank for air horn use, off road air locking differential use, and a host of other light duty pneumatic needs.
While not intended to inflate tires, this onboard air system provides
a reliable smaller volume, in a cost effective package.

Please Note: Use thread sealant for proper installation.
Teflon tape is not recommended.
Properly sealed, recommended torque for 1/8" is 10 ~ 11 ft. lbs. Recommended torque for 1/4" and 3/8" is 12 ~ 15 ft. lbs.

air locker icon air horn icon

Features:
- 1.0 Gallon VIAIR Air Tank
- 98C VIAIR Air Compressor
- Omega Bracket with Mounting Hardware
- Pressure Switch (85 PSI on, 105 PSI off)
- 40-amp Relay
- 145 PSI Safety Valve
- T-Fitting: 1/4” (M) x 1/4" (F) x 1/8” (F)
- T-Fitting: 1/4” (M) x 1/4" (F) x 1/4” (F)
- 1/4” Drain Cock
- 1/4” Compression Fitting
- 1/4” Plug (M)
- (2) 1/4” (M) NPT to 1/8” (F) BSP
- 20ft. 12 Gauge Wire with Inline Fuse Holder
- Accessory Airline
- Electrical Connections

All Fittings are NPT rated unless otherwise noted.

Recommended Components:
- Pressure Regulator (P/N 90150)

- 12-Volt
- Permanent Magnetic Motor
- Duty Cycle: 10% @ 100 PSI
- Max. Working Pressure: 105 PSI
- Max. Amp Draw: 12 Amps
- Ingress Protection Rating: IP54

User Manual
Dimensional Drawings
Wiring Diagram
Plumbing Diagram

PSI CFM A BAR LPM A
0 1.53 7 0 43.5 7
10 1.00 9 1.0 28.0 9
20 0.95 10 2.0 25.5 11
30 0.90 11 3.0 22.7 11
40 0.83 11 4.0 20.7 12
50 0.77 12 5.0 18.3 12
60 0.72 12 6.0 16.3 12
70 0.65 12 7.0 13.7 12
80 0.60 12 8.0 11.7 12
90 0.54 12 9.0 10.0 11
100 0.48 12  
110 0.44 12  
120 0.39 12  
130 0.35 11  

1.0 Gallon Tank Fill Rate
0 to 105 PSI 1 min. 40 sec. (± 10 sec.)
85 to 105 PSI 30 sec. (± 05 sec.)



 
WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.