FEATURES |
---|
– 2.0 Gallon VIAIR Air Tank |
– 275C VIAIR Air Compressor w/Thermal Overload Protector |
– Pressure Switch (90 PSI on, 120 PSI off) |
– 40-Amp Relay |
– 1/4” NPT 145 PSI Safety Valve |
– 1/4” Drain Cock |
– 1/4” Compression Fitting |
– 20ft. 16 Gauge Wire with Inline Fuse Holder |
– Accessory Airline |
– Electrical Connections |
SPECIFICATIONS |
---|
– 12-Volt |
– Permanent Magnetic Motor |
– Duty Cycle: 25% @ 100 PSI |
– Max. Working Pressure: 120 PSI |
– Max. Amp Draw: 18-Amps |
– Ingress Protection Rating: IP54 |
– Max Ambient Temp: +158°F |
– Min Ambient Temp: -40°F |
– |
– |
All Fittings are NPT rated unless otherwise noted.
Wiring harness NOT included.
Please Note: Use thread sealant for proper installation. Thread tape is not recommended.
Properly sealed, recommended torque for 1/8” is 10 ~ 11 ft. lbs. Recommended torque for 1/4” and 3/8” is 16 ~ 18 ft. lbs.
PERFORMANCE DATA
PSI | CFM | A | BAR | LPM | A |
---|---|---|---|---|---|
0 | 2.03 | 10 | 0 | 57.5 | 10 |
10 | 1.17 | 12 | 1.0 | 32.0 | 13 |
20 | 1.11 | 13 | 2.0 | 30.0 | 14 |
30 | 1.04 | 15 | 3.0 | 28.5 | 16 |
40 | 1.01 | 15 | 4.0 | 26.5 | 16 |
50 | 0.97 | 16 | 5.0 | 24.5 | 17 |
60 | 0.92 | 16 | 6.0 | 22.5 | 17 |
70 | 0.88 | 17 | 7.0 | 21.5 | 18 |
80 | 0.83 | 17 | 8.0 | 20.0 | 18 |
90 | 0.79 | 17 | |||
100 | 0.76 | 18 | |||
110 | 0.72 | 18 | |||
120 | 0.69 | 18 |
* Supply Voltage: 13.8 Volts
FILL RATES
2.0 Gallon Tank | Fill Rate |
---|---|
0 to 120 PSI | 2 min. 22 sec. (± 10 sec.) |
90 to 120 PSI | 46 sec. (± 05 sec.) |