VIAIR Corporation

Dual 380C OBA

For up to 40" Tires

200 PSI / 2.54 CFM P/N 20013

VIAIR’s Dual 380C Onboard Air System is a pre-packaged compressed air solution that provides two 380C, 100% duty cycle compressors, a 2.5 gallon air tank, inline pressure regulation, and all components needed to install a working system capable of inflating tires, managing air locking differentials, and more.

Please Note: Use thread sealant for proper installation.
Teflon tape is not recommended.
Properly sealed, recommended torque for 1/8" is 10 ~ 11 ft. lbs. Recommended torque for 1/4" and 3/8" is 12 ~ 15 ft. lbs.

air tool icon tire inflation icon air locker icon air horn icon

Features:
- 2.5 Gallon 200 PSI VIAIR Air Tank
- (2) 380C VIAIR Compressors
- 30ft. Coil Hose with Quick Connects
- Tire Inflation Gun with 200 PSI Gauge
- 0-220 PSI Pressure Regulator
- Sealed Pressure Switch (165 PSI on, 200 PSI off)
- 200 PSI Illuminated Dash Panel Gauge
- (2) 40-amp Relays
- Inline Fuse Holder
- 1/4” Quick Connect Coupler (M)
- 1/4” 250 PSI Safety Valve
- 1/4” Drain Cock
- (2) 1/8” BSP to 1/4” NPT
- (3) 1/4” Compression Fittings
- 5 Pc. 1/4” NPT Plugs Kit
- 6-Port Billet Manifold with Mounting Bracket (1/4”)
- (2) 15ft. 1/4” Air Line Included
- Electrical Connections

* All Fittings are NPT rated unless otherwise noted.
** Wiring harness NOT included.

Recommended Components:
- Mounting Bracket (P/N 95900)

- 12-Volt
- Permanent Magnetic Motor
- Duty Cycle: 100% @ 100 PSI
- Max. Working Pressure: 200 PSI
- Max. Amp Draw: 44 Amps
- Ingress Protection Rating: IP67

User Manual
Dimensional Drawings
Wiring Diagram
Plumbing Diagram

PSI CFM A BAR LPM A
0 2.54 28 0 72.0 28
10 2.42 29 1.0 67.0 30
20 2.30 31 2.0 61.7 33
30 2.17 33 3.0 57.5 34
40 2.07 34 4.0 53.5 36
50 1.95 35 5.0 49.8 37
60 1.87 36 6.0 46.4 39
70 1.78 37 7.0 43.3 41
80 1.70 38 8.0 40.3 43
90 1.61 39 9.0 37.2 44
100 1.54 41 10.0 34.5 42
110 1.46 42 11.0 31.8 41
120 1.40 43 12.0 29.2 40
130 1.32 44 13.0 26.6 38
140 1.25 43 14.0 23.7 37
150 1.19 42  
160 1.12 41  
170 1.06 40  
180 0.99 39  
190 0.93 38  
200 0.86 37 * Supply Voltage: 13.8 Volts

2.5 Gallon Tank Fill Rate
0 to 200 PSI 3 min. 13 sec. (± 10 sec.)
165 to 200 PSI 53 sec. (± 05 sec.)
37" x 12.5" Fill Rate
0 to 30 PSI 5 min. 00 sec. (± 15 sec.)
15 to 30 PSI 2 min. 30 sec. (± 10 sec.)
40" x 15.5" Fill Rate
0 to 30 PSI 5 min. 25 sec. (± 15 sec.)
15 to 30 PSI 2 min. 40 sec. (± 10 sec.)



 
WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.