FEATURES |
---|
– 2.5 Gallon 150 PSI VIAIR Air Tank |
– (2) 280C VIAIR Compressors w/Thermal Overload Protectors |
– 30ft. Coil Hose with Quick Connects |
– Tire Inflation Gun with 200 PSI Gauge |
– 0-220 PSI Pressure Regulator |
– Sealed Pressure Switch (110 PSI on, 145 PSI off) |
– 150 PSI Illuminated Dash Panel Gauge |
– (2) 40-Amp Relays |
– Inline Fuse Holder |
– 1/4” Quick Connect Coupler (M) |
– 1/4” 175 PSI Safety Valve |
– 1/4” Drain Cock |
– (2) 1/8” BSP to 1/4” NPT |
– (4) 1/4” Compression Fittings |
– 5pc. 1/4” NPT Plugs Kit |
– 6-Port Billet Manifold with Mounting Bracket (1/4”) |
– (2) 20ft. 1/4” Air Line Included |
– Electrical Connections |
SPECIFICATIONS |
---|
– 12-Volt |
– Permanent Magnetic Motor |
– Duty Cycle: 30% @ 100 PSI |
– Max. Working Pressure: 150 PSI |
– Max. Amp Draw: 33-Amps |
– Ingress Protection Rating: IP54 |
– Max Ambient Temp: +158°F |
– Min Ambient Temp: -40°F |
– |
– |
– |
– |
– |
– |
– |
– |
– |
– |
All Fittings are NPT rated unless otherwise noted. Wiring harness NOT included..
Please Note: Use thread sealant for proper installation. Thread tape is not recommended.
Properly sealed, recommended torque for 1/8” is 10 ~ 11 ft. lbs. Recommended torque for 1/4” and 3/8” is 16 ~ 18 ft. lbs.
PERFORMANCE DATA
PSI | CFM | A | BAR | LPM | A |
---|---|---|---|---|---|
0 | 2.96 | 21 | 0 | 84.0 | 21 |
10 | 2.78 | 24 | 1.0 | 75.5 | 25 |
20 | 2.58 | 26 | 2.0 | 69.0 | 28 |
30 | 2.38 | 28 | 3.0 | 62.5 | 30 |
40 | 2.27 | 29 | 4.0 | 56.5 | 31 |
50 | 2.13 | 31 | 5.0 | 51.5 | 32 |
60 | 1.97 | 31 | 6.0 | 47.0 | 32 |
70 | 1.88 | 32 | 7.0 | 43.5 | 32 |
80 | 1.74 | 32 | 8.0 | 39.5 | 32 |
90 | 1.62 | 32 | 9.0 | 36.0 | 32 |
100 | 1.56 | 32 | 10.0 | 33.5 | 32 |
110 | 1.46 | 32 | |||
120 | 1.37 | 32 | |||
130 | 1.29 | 32 | |||
140 | 1.23 | 32 | |||
150 | 1.16 | 32 |
* Supply Voltage: 13.8 Volts
FILL RATES
2.5 Gallon Tank | Fill Rate |
---|---|
0 to 105 PSI | 1 min. 06 sec. (± 10 sec.) |
85 to 105 PSI | 16 sec. (± 03 sec.) |
0 to 145 PSI | 1 min. 44 sec. (± 10 sec.) |
110 to 145 PSI | 31 sec. (± 03 sec.) |
33″ x 12.5″ | Fill Rate |
0 to 30 PSI | 4 min. 10 sec. (± 15 sec.) |
15 to 30 PSI | 1 min. 50 sec. (± 10 sec.) |
35″ x 12.5″ | Fill Rate |
0 to 30 PSI | 5 min. 02 sec. (± 15 sec.) |
15 to 30 PSI | 2 min. 15 sec. (± 10 sec.) |