VIAIR Corporation

100C Compressor

130 PSI / 1.27 CFM P/N 10016 - Omega Bracket

VIAIR's 100 Series with omega-style bracket is a bare compressor that comes standard with a chrome motor housing and chrome end plates. Insulated wiring is pre-installed. This compressor does not come equipped with a leader hose but does come with an
inline check valve.

Note: Use thread sealant for proper installation.
Teflon tape is not recommended. Properly sealed,
recommended torque is 12 to 15 ft. lbs.

air tank icon

Features:
- Omega Bracket
- Check Valve
- Vibration Isolators
- Mounting Hardware
- Installation Instructions



- 12-Volt
- Permanent Magnetic Motor
- Duty Cycle: 15% @ 100 PSI
- Max. Working Pressure: 130 PSI
- Max. Air Tank Size: 1.0 Gallon
- Max. Amp Draw: 14 Amps
- Ingress Protection Rating: IP54
- Dimensions: 6.0"L x 3.5"W x 5.3"H
- Net Weight: 3.45 lbs.

User Manual
Dimensional Drawings
Wiring Diagram

PSI CFM A BAR LPM A
0 1.27 9 0 36.0 9
10 0.90 10 1.0 25.0 10
20 0.85 11 2.0 22.5 11
30 0.79 11 3.0 21.0 12
40 0.76 12 4.0 20.0 13
50 0.72 12 5.0 18.3 12
60 0.71 13 6.0 17.0 12
70 0.67 13 7.0 15.0 12
80 0.64 12 8.0 13.7 12
90 0.59 12 9.0 12.3 12
100 0.55 12      
110 0.52 12      
120 0.48 12  
130 0.45 12 * Supply Voltage: 13.8 Volts

0.5 Gallon Tank Fill Rate
0 to 105 PSI 50 sec. (± 05 sec.)
85 to 105 PSI 10 sec. (± 03 sec.)
0 to 120 PSI 1 min. 00 sec. (± 05 sec.)
90 to 120 PSI 17 sec. (± 03 sec.)
1.0 Gallon Tank Fill Rate
0 to 105 PSI 1 min. 40 sec. (± 10 sec.)
85 to 105 PSI 25 sec. (± 05 sec.)
0 to 120 PSI 2 min. 00 sec. (± 10 sec.)
90 to 120 PSI 35 sec. (± 05 sec.)



 
WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.