FEATURES |
---|
– 2.0 Gallon VIAIR Air Tank |
– (2) 325C VIAIR Compressors w/Thermal Overload Protectors |
– (2) Thermal Overload Protectors |
– 30ft. Coil Hose with Quick Connects |
– Tire Inflation Gun with 160 PSI Gauge |
– Dash Panel Gauge with ON/OFF Switch |
– 0-220 PSI Pressure Regulator |
– Blow Gun Air Tool |
– Sealed Pressure Switch (110 PSI on, 145 PSI off) |
– (2) 40-Amp Relays |
– (1) T-Fitting (1/4” (M) x 1/4″ (F) x 1/8” (F)) |
– (1) T-Fitting (1/4” (M) x 1/4″ (F) x 1/4” (F)) |
– 1/4” Quick Connect Stud (F) |
– 1/4” Quick Connect Coupler (F) |
– 1/4” 175 PSI Safety Valve |
– 1/4” Drain Cock |
– (2) 1/8” BSP to 1/4” NPT |
– (4) 1/4” Compression Fittings |
– 20ft. 12-Gauge Wire with Inline Fuse Holder |
– 4” Strip of Continuous Grommet Material |
– Accessory Airline |
– Electrical Connections |
SPECIFICATIONS |
---|
– 12-Volt |
– Permanent Magnetic Motor |
– Duty Cycle: 33% @ 100 PSI |
– Max. Working Pressure: 150 PSI |
– Max. Amp Draw: 38-Amps |
– Ingress Protection Rating: IP67 |
– Max Ambient Temp: +158°F |
– Min Ambient Temp: -40°F |
– |
– |
– |
– |
– |
– |
– |
– |
– |
– |
– |
– |
– |
– |
All Fittings are NPT rated unless otherwise noted.
Wiring harness NOT included.
Please Note: Use thread sealant for proper installation. Thread tape is not recommended.
Properly sealed, recommended torque for 1/8” is 10 ~ 11 ft. lbs. Recommended torque for 1/4” and 3/8” is 16 ~ 18 ft. lbs.
PERFORMANCE DATA
PSI | CFM | A | BAR | LPM | A |
---|---|---|---|---|---|
0 | 3.21 | 22 | 0 | 91.0 | 22 |
10 | 2.81 | 24 | 1.0 | 76.0 | 28 |
20 | 2.54 | 27 | 2.0 | 68.0 | 31 |
30 | 2.40 | 30 | 3.0 | 64.0 | 33 |
40 | 2.30 | 32 | 4.0 | 59.0 | 35 |
50 | 2.19 | 33 | 5.0 | 55.0 | 36 |
60 | 2.07 | 34 | 6.0 | 53.0 | 36 |
70 | 1.98 | 35 | 7.0 | 51.0 | 36 |
80 | 1.91 | 36 | 8.0 | 47.5 | 37 |
90 | 1.85 | 36 | 9.0 | 45.0 | 37 |
100 | 1.78 | 36 | 10.0 | 42.0 | 37 |
110 | 1.73 | 37 | |||
120 | 1.66 | 38 | |||
130 | 1.59 | 37 | |||
140 | 1.52 | 37 | |||
150 | 1.45 | 37 |
* Supply Voltage: 13.8 Volts
FILL RATES
2.0 Gallon Tank | Fill Rate |
---|---|
0 to 145 PSI | 1 min. 26 sec. (± 05 sec.) |
110 to 145 PSI | 25 sec. (± 03 sec.) |
33″ x 12.5″ | Fill Rate |
0 to 30 PSI | 3 min. 40 sec. (± 10 sec.) |
15 to 30 PSI | 1 min. 50 sec. (± 05 sec.) |
35″ x 12.5″ | Fill Rate |
0 to 30 PSI | 4 min. 36 sec. (± 10 sec.) |
15 to 30 PSI | 2 min. 20 sec. (± 05 sec.) |